Dyneema SK75 10m length, 50kg BS, 0.4mm dia, white 

Hales double deck mounted block.

IOM A set (Main & Jib) 50 micron including tell tails, IOM insignia, main jackstay & jib forestay. Large selection of luff & patch colours available.

Stainless steel back stay crane.

Jib boom forward end will fit 10mm or 11mm boom. Insert counter-weight in slot in forward end of the fitting. 

38mm Double Winch Drum featuring a double-groove design, suitable for multiple classes of boat.

Note: winch not included

Dyneema SK75 10m length, 100kg BS, 0.8mm dia, white. 

Plastic through deck sheet lead comes as two pieces with mounting screws and 100mm 2mm ID PTFE tube. 

Ideal for allowing your sheets to pass through the deck, simply drill a hole in the deck for the tube to pass through and holes for the mounting screws. One piece mounts from underneath the deck (with nuts in the body of the fitting) and place the second piece on top and screw the mounting screws in. It's easy to mount and with no fiddly tricky placing of nuts on screws under the deck.

A perfect solution for those with Vickers boats looking to remove the aft mounted snorkel.

Main sail head board wire, fits into mast plugs.

Main Boom Forward End suit 10mm or 11mm dia boom. Includes screw to attach to gooseneck body.

Spectra 10m length, 45kg BS, 0.45mm dia, yellow. 

Rigging screw - M3. Single end design, nickel plated brass, M3 thread, self locking design, 1.2 mm Ø stainless steel wire. This self locking rigging screw can be used in a NON SELF LOCKING mode by removing the O ring. Add a normal M3 nut or a Nyloc self locking nut as preferred to provide the lock nut function.