Jib boom counterweight weighing 23 grams. Ideal for your IOM jib boom on all rigs.
Tungsten bullet tip, small & sleek.
Item cost is per counterweight.
Plastic through deck sheet lead comes as two pieces with mounting screws and 100mm 2mm ID PTFE tube.
Ideal for allowing your sheets to pass through the deck, simply drill a hole in the deck for the tube to pass through and holes for the mounting screws. One piece mounts from underneath the deck (with nuts in the body of the fitting) and place the second piece on top and screw the mounting screws in. It's easy to mount and with no fiddly tricky placing of nuts on screws under the deck.
A perfect solution for those with Vickers boats looking to remove the aft mounted snorkel.
Tungsten putty 25g (piece)
Tungsten putty is a firm, malleable material made from tungsten powder and a polymer binder that will tend to harden when submerged into cold water after shaping. This results in a material that is 30% heavier than lead, reusable, non-toxic, and requiring a smaller amount to have the same benefits as lead. Tungsten putty leaves no sticky residue on hands, clothing or gear, is lead free, and therefore safer for the user and the environment.
Ideal for adding weight to masts by breaking it into small pieces to get an accurate weight on rigs.
21700 3.7v 4800mah Rechargeable Battery Lithium-ion suitable for Jumper T14 transmitter.
Mast ram to suit 10.8mm-11.1mm dia. mast. Stainless steel and plastic. This is the style of mast ram that remains on the hull and is normally bulkhead mounted.
Jib boom forward end will fit 10mm or 11mm boom. Insert counter-weight in slot in forward end of the fitting.
IOM C set (Main & Jib) 75 micron including tell tails, IOM insignia, main jackstay & jib forestay. Large selection of luff & patch colours available.
