There are 32 products.
Clew Attachment for 11mm diameter round boom section. Adjustable by sliding along boom.
Rigging screw - M3. Single end design, nickel plated brass, M3 thread, self locking design, 1.2 mm Ø stainless steel wire. This self locking rigging screw can be used in a NON SELF LOCKING mode by removing the O ring. Add a normal M3 nut or a Nyloc self locking nut as preferred to provide the lock nut function.
The Variant Marine Jib Boom Forward End provides a simple and reliable solution for mounting jib boom counterbalance weights while protecting the forward end of the boom. Designed to fit both 10mm and 11mm jib booms, this fitting offers a secure attachment point and a clean, professional finish to your rig.
The integrated slot allows the counterbalance weight to be inserted directly into the forward end fitting, creating a compact and streamlined installation. This design keeps the weight securely positioned while maintaining an efficient aerodynamic profile.
The spreaders are supplied at a standard length of 60mm and are designed to be trimmed to your required length. Once trimmed, the side stay can be secured by either drilling a suitable retaining hole through the end of the spreader or fitting the supplied side-stay retaining pin into the end, depending on your preferred setup.
Boom clamp with wasted crew, ideal for jib swivel on IOM A & B rig.
The Head Fitting is designed for 11mm Ø round mast tubes and the 11.1mm alloy GROOVY mast section, making it a perfect fit for IOM, and similar-sized boats. The fitting provides a seamless attachment to your rigging, ideal for sailors looking for a high-quality, easy-to-install solution for their mast setup.
The Sheet/Forestay Attachment is specifically designed for 11mm round booms and is ideal for high-load applications such as sheet and forestay attachment points. Made from stainless steel, it features a 3.3mm Ø hole, perfect for use with a Zed Hook (Ref. 87Z). The attachment is carefully engineered to handle significant stress while ensuring smooth operation.
The hole is mechanically de-burred and tumbled to eliminate any rough edges, preventing damage to the sheet as it passes through. Its profile shape is designed to minimize the risk of snagging lines, offering a reliable and efficient solution for your rigging needs.
For applications with lower loads, consider using the lighter and more economical Boom Band with Eye (048-11x) equivalent for a more cost-effective alternative.
Corrector weight specifically designed to fit inside 11 mm round mast. Each weight is 10 grams. The 9.6 mm diameter fits inside most nominal 11mm dia round masts. Nickel plated to help reduce corrosion.
Cost is per weight.
Jib Boom Aft End available for 10mm or 11mm boom. Select size from the options shown.
Jib boom swivel with stainless steel ball race for 11mm round boom section.
