There are 30 products.
Clew Attachment for 11mm diameter round boom section. Adjustable by sliding along boom.
Rigging screw - M3. Single end design, nickel plated brass, M3 thread, self locking design, 1.2 mm Ø stainless steel wire. This self locking rigging screw can be used in a NON SELF LOCKING mode by removing the O ring. Add a normal M3 nut or a Nyloc self locking nut as preferred to provide the lock nut function.
The spreaders are supplied at a standard length of 60mm and are designed to be trimmed to your required length. Once trimmed, the side stay can be secured by either drilling a suitable retaining hole through the end of the spreader or fitting the supplied side-stay retaining pin into the end, depending on your preferred setup.
Boom clamp with wasted crew, ideal for jib swivel on IOM A & B rig.
The Head Fitting is designed for 11mm Ø round mast tubes and the 11.1mm alloy GROOVY mast section, making it a perfect fit for IOM, and similar-sized boats. The fitting provides a seamless attachment to your rigging, ideal for sailors looking for a high-quality, easy-to-install solution for their mast setup.
The Sheet/Forestay Attachment is specifically designed for 11mm round booms and is ideal for high-load applications such as sheet and forestay attachment points. Made from stainless steel, it features a 3.3mm Ø hole, perfect for use with a Zed Hook (Ref. 87Z). The attachment is carefully engineered to handle significant stress while ensuring smooth operation.
The hole is mechanically de-burred and tumbled to eliminate any rough edges, preventing damage to the sheet as it passes through. Its profile shape is designed to minimize the risk of snagging lines, offering a reliable and efficient solution for your rigging needs.
For applications with lower loads, consider using the lighter and more economical Boom Band with Eye (048-11x) equivalent for a more cost-effective alternative.
Corrector weight specifically designed to fit inside 11 mm round mast. Each weight is 10 grams. The 9.6 mm diameter fits inside most nominal 11mm dia round masts. Nickel plated to help reduce corrosion.
Cost is per weight.
Jib Boom Aft End available for 10mm or 11mm boom. Select size from the options shown.
Jib boom swivel with stainless steel ball race for 11mm round boom section.
SAILSetc design for better grip, 12 x 4mm size
Buy 2 packs of 5 bowsies and the 2nd one is half price!
Plastic through deck sheet lead comes as two pieces with mounting screws and 100mm 2mm ID PTFE tube.
Ideal for allowing your sheets to pass through the deck, simply drill a hole in the deck for the tube to pass through and holes for the mounting screws. One piece mounts from underneath the deck (with nuts in the body of the fitting) and place the second piece on top and screw the mounting screws in. It's easy to mount and with no fiddly tricky placing of nuts on screws under the deck.
A perfect solution for those with Vickers boats looking to remove the aft mounted snorkel.
SAILSetc design for better grip, 10 x 3.5 mm size.
Use with Dyneema lines of 0.6 mm Ø or less.
